Igus to display drylin delta robot

Posted on 30 Jan 2019 and read 560 times
Igus to display drylin delta robot Northampton-based Igus (www.igus.co.uk/delta) will be showcasing the drylin delta robot at Southern Manufacturing — the latest addition to its low-cost automation offering (Stand G165), delivered as a kit or fully assembled.

The typical ROI period for the robot is estimated at just six months, which compares favourably to the industry’s rule-of-thumb target of two years.

Made from well-known Igus products, the drylin delta robot is based on three maintenance-free drylin ZLW toothed-belt axes, lubrication-free igubal link rods and matching adapter plates.

NEMA stepper motors and encoders ensure the fast handling of loads up to 1kg with a precision of ±0.5mm.

The complete system has an installation space of up to 420mm in diameter and can carry up to 5kg at lower speeds.

The pick rate is at least 60 per min; depending on the set-up, it can be substantially higher.

Be seen in all the right places!

The Fastener Exhibition & Conference EMO 2019 TCT Show 2019 TOOLEX 2019 Northern Manufacturing 2019 MTA Hanoi 2019 Advanced Engineering 2019 Metalex 2019 Machine Tool Indonesia 2019 Steelfab 2020 WIN Eurasia 2020 Shenzhen International Machinery Manufacturing MACH 2020