Hi Tech Automation has been a Fanuc system integrator partner for over 15 years

System integrators (SIs) serve as a valuable link between robot suppliers and automation end users. Usually specialising in one particular sector, SIs provide industry-specific automation advice to help companies improve their efficiency, as well as building standard or bespoke automation systems that allow manufacturers to benefit from the latest robotic technology. At the same time, they offer a direct route-to-market for robot suppliers who may otherwise struggle to penetrate particular niche sectors.

Leading robot manufacturer Fanuc works with innovative SIs across sectors as diverse as food and beverage, aerospace, medical, welding, plastics and high-value manufacturing. Some of these partnerships have endured for well over a decade, during which time the skills required to be a successful integrator have evolved. Since the introduction of the IIoT (industrial internet of things), many of today’s factories are smart and connected, around the clock. Being able to integrate a robot into an existing line therefore requires more than mechanical capabilities; today’s SIs must also possess a high level of programming and other software skills to ensure that factory managers are able to receive a constant flow of data to enhance their manufacturing operation, as well as for transparency and reporting purposes.

Dan Fisher is the partner sales manager for Fanuc UK and has seen this evolution ramp up over the past few years. “Factory managers now expect instant information on a product’s position in the manufacturing lifecycle, particularly if they are dealing with perishable goods. Fanuc’s robots are known for being simple to install, easy to programme and user friendly. However, being able to integrate a robot into what is in effect a mini warehouse management system is a crucial skill for an SI and includes being proficient across multiple programming languages.

“While lots of engineers are software savvy, some lack traditional mechanical skills that are still essential to a successful automation installation, such as welding, guarding and fabricating. For this reason, we ensure that any SI we work with not only demonstrates strong programming abilities but is also supported by a network of mechanical engineers.”

Reliability is key
The majority of automation system integrators are independent service providers, meaning they can specify robots from a variety of manufacturers. Deciding which automation company to partner with is an important choice that can make or break a project, as Gary Probert, director of Hi Tech Automation, explained: “We deliver standard and bespoke automated injection moulding systems for the plastics sector and have been a Fanuc system integrator partner for over 15 years, most commonly specifying its Roboshot all-electric injection moulding machine. For us, reliability is key — when dealing with a new customer, it is important that the first installation goes well as that sets the tone for the rest of the relationship.”

Pictured right: Loop Technology’s RoboMACH HA trimming carbon fibre using a Fanuc M-800 robot

He continued: “Using Fanuc products means we can be sure that the project will be right first time. The company’s robots are built to last, with an eight-year mean time between failures. It is also one of the only robot companies that manufactures every part of the robot themselves — motors, drives, everything. It reflects badly on us if a system breaks down so knowing the base robot is rock solid is a real advantage. In addition, as 90% of the systems we sell have something extra on them — for example, integrated vision or auxiliary axes — it helps that we are able to get it all from Fanuc. There is no need for us to go to another supplier, which keeps things simple and reduces the risk to the client.”

Mr Probert also pointed out that working with a system integrator is a sure-fire way to derisk an automation installation project for customers. Responsibility lies with one SI, rather than a number of external suppliers — and SIs also bring with them sector-specific knowledge and expertise which individual robot suppliers may not possess.

This view is echoed by Fanuc’s Dan Fisher (pictured below), who said: “For the customer, working with an SI partner that only operates within your chosen sector is a real bonus. They will understand the challenges you are looking to overcome, the pitfalls you want to avoid, and the advantages you expect to make from your automation installation.

“From Fanuc’s perspective, while we are the expert in our own range of products, we may not know everything about each sector in which our robots are employed. To ensure the customer gets the right solution, at the right price, and that it works as intended for their particular application, dealing with an SI with specialist sector knowledge is a fast-track to success.”

Comprehensively trained
This works both ways, however. To ensure the customer gets the very best out of their automation solution, it is imperative that the SI understands the full capabilities of any robot, machine or ancillary equipment that they are specifying. Fanuc treats its SI partners as extensions of its in-house sales teams and provides training for up to 30 employees from the SI throughout the year. As well as ensuring they are comprehensively trained on Fanuc’s entire product portfolio, it also offers specialist courses in ever-evolving areas such as vision and safety using its Dual Check Safety software, and Fanuc Roboguide simulation. This keeps the SIs up-to-date with the very latest in automation technology.

This kind of support is invaluable to SIs if they are to remain offering a quality service to their customers. Darryl Keel is the technical sales engineer (European Union and the Americas) for Alphr Technology, a supplier of high-end automation delivering test and measurement, advanced robotics, and modular solutions to customers in the electronics, automotive, medical, defence, HVAC and aerospace industries.

Mr Keel explained the importance of Fanuc’s support to the automation systems they deliver to their clients: “We have been a Fanuc SI partner for just one year and have already purchased 30 robots from the company in that time. Fanuc’s product range is excellent, and it is known for making reliable robots. But the quality of the company’s training and support was what really sealed the deal. We have sent our staff on a number of Fanuc courses already; for example, the Roboguide simulation training for designers, which was first class.

“We also appreciate their global support network. As our customers are based all over the world, we need a robot manufacturer that can supply and support us globally, so the fact that there are Fanuc agents across the world to support our international customers is of real benefit to us.” Mr Keel emphasised that Fanuc’s support extends beyond training to offer a complete wraparound service.

Mr Fisher continued: “We have dedicated engineering support and software support teams, and a specialist integrator hotline which puts our SI partners through to Fanuc technical experts within secondss. While the reliability of our products is obviously important, the real difference to an SI is knowing that technical knowledge and support is there, whenever and wherever they need it. In fact, we have won multiple SI accounts due to the quality of our support. When we work with a system integrator, we are building a long-term relationship — we want to remain connected in 10 or 20 years’ time.”

Alongside first-class training, global support, product reliability and ease of use, there is another factor that SIs look for in a robot partner. For Loop Technology, which delivers innovative automation systems for high-value manufacturers in the areas of aerospace, automotive and defence, the differentiating factor is robot accuracy.

Adam White, Loop’s technical sales engineer, said: “In terms of performance, Fanuc offers more than most robot suppliers. Our RoboMACH HA system uses Fanuc’s M-800 robot, which offers outstanding path accuracy even for high speeds and tight curves. Our customers use it for trimming composites for automotive and aerospace applications, and in these highly demanding sectors, standard robots are simply not accurate enough. Our work is innovative and we pride ourselves on pushing boundaries. Whether we are creating a standard or a bespoke solution, our robot partner is a crucial part of the chain.”

System integrators looking for a robot partner, particularly those that operate in a niche sector, can contact to find out more about the benefits of working with Fanuc UK.